VDH-Rail piling rigs – Van Den Heuvel https://vdhmachinery.com/en/ Mon, 30 Mar 2026 14:36:44 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://vdhmachinery.com/wp-content/uploads/2026/03/cropped-favicon-32x32.png VDH-Rail piling rigs – Van Den Heuvel https://vdhmachinery.com/en/ 32 32 VDH-PV15 https://vdhmachinery.com/en/machines/vdh-pv15/ Fri, 15 Aug 2025 09:42:33 +0000 https://vdhmachinery.com/machines/vdh-pv15/ The machine can pile thanks to the mounted pile hammer, drill using a drill motor that can be mounted, and a vibratory hammer can be installed in the machine for vibrating various types of sheet piles. Due to its compactness and short turning circle, the PV15 can do its work while the tracks next to it can remain operational. This ensures increased productivity. In addition, the PV15 can erect under high-voltage lines, eliminating the need to remove the machine from the track for piling work.

The PV15 is self-propelled, both on rails and on tracks. In the VDH workshop, the machine is equipped with a self-propelled rail system, so that the machine does not have to be pushed or pulled by another train set. In addition, a leader, hammer, sliding table, winches and extra ballast are added. A standard excavator can also be equipped with this, although VDH prefers a machine selected by themselves.

VDH-PV15 front view
VDH-PV15 next to train
VDH-PV15 on the track
VDH-PV15 next to pole
VDH-PV15 at work next to track

Despite the machine being so compact, the PV15 can drive piles of various lengths up to a maximum of 7.5 meters. This is due to the height-adjustable 3-fold leader specially developed by VDH. Different drive caps can also be used on the machine. This allows both square piles and piles with threaded ends to be driven into the ground.

Advantages of the VDH-PV15

  • Suitable for work on and around the track
  • Compact, in operation and in transport
  • Other tracks can remain operational
  • Self-propelled, rail system or tracks
  • Can be erected under high-voltage cables
  • Multifunctional: piling, vibrating, drilling
  • Various drive caps possible
  • EN16228 certified
]]> VDH-PV335 https://vdhmachinery.com/en/machines/vdh-pv335/ Tue, 19 Aug 2025 14:16:59 +0000 https://vdhmachinery.com/machines/vdh-pv335/ The VDH-PV335 is a multifunctional piling rig for carrying out various types of foundation work on railway projects. The machine can drive piles or tubes using the mounted 3-tonne hammer, drill using a drill motor that can be mounted, and a vibratory hammer can be installed in the machine for vibrating various types of sheet piles. The PV335 is so compact that the machine can do its work while the adjacent tracks can remain operational. This ensures increased productivity.

In the VDH workshop, two different types of self-propelled hydraulic rail sets are mounted under the machine, so that the PV335 can carry out foundation work from the track. An advantage of these rail sets is that they are self-steering and one of them is even pendular. This makes the machine extremely suitable for working on tracks with switches, in sharp bends and in hilly conditions. Thanks to the 60 cm wide track plates, the PV335 can also be used next to the track. In addition to the rail set, a leader, hammer, sliding table, winches and extra ballast are added to the machine in the workshop. The special sliding table – which can be extended further than that of the PV15 – ensures that the leader can do its work in different positions and the reach is greater than with the PV15.

VDH-PV335 from the front
VDH-PV335 close up
VDH-PV335 on industrial estate
VDH-PV335 on the track
VDH-PV335 at work on the track

Despite the fact that the machine is so compact, the PV335 can drive piles of various lengths up to a maximum of 7.5 meters. This is due to the height-adjustable leader specially developed by VDH. Different drive caps can also be used on the machine. This means that both square piles and piles with threaded ends can be driven into the ground.

The advantages of the VDH-PV335

  • Suitable for work on and around the track
  • Multifunctional: piling, vibrating, drilling
  • Compact, in operation and in transport
  • Other tracks can remain operational
  • Hydraulic self-steering (pendular) rail set
  • Can be erected under high-voltage cables
  • EN16228 certified
]]>